technical data sheet micro rf cable assembly lh1-071-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 4 rf_35/12.04/3.0 all dimensions are in mm; tolerances: 3mm for a3 00mm; 1% for >300mm cables cable group h1 micro coax cable d=1.37mm, center co nductor awg30 connector are only sold with cable. picture on data sheet show an assembly example minimum bending radius single 4x ? minimum bending radius repeatable 8x ? available variants type cable weight [0,1g] lh1-071-xxx-nm h1 (rtk013) 4,6*10 -3 (g/mm) * a(mm) xxx: length in mm = a
technical data sheet micro rf cable assembly lh1-071-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 4 rf_35/12.04/3.0 technical data 15s202-1h1 all dimensions are in mm; tolerances according to i so 2768 m-h interface according to 15k101-40m rf test switch material and plating connector parts material plating center contact spring bronze 3-6m ag over 0.2-1.0 m cu outer contact spring bronze 3-6m ag over 0.2-1.0m cu cover spring bronze 3-6m ag over 0.2-1.0m cu insulator tpx
technical data sheet micro rf cable assembly lh1-071-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 3 / 4 rf_35/12.04/3.0 electrical data impedance 50 w frequency dc to 6 ghz return loss 3 -26 db, dc to 2 ghz 3 -23 db, 2 to 4 ghz 3 -18 db, 4 to 6 ghz insulation resistance 3 0.5 x10 3 m w center contact resistance 50 m w outer contact resistance 100 m w shielding effectiveness > 40 db up to 3 ghz > 35 db up to 6 ghz mechanical data mating cycles 25 mating force 45 n unmating force 2n mated height 2.4 mm environmental data temperature range -40c to +90c storage temperature -40c to +90c rohs compliant cable load after mating do not apply higher forces than define d in the picture below. max. 2n max. 2n max. 4n
technical data sheet micro rf cable assembly lh1-071-xxx-nm rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 4 / 4 rf_35/12.04/3.0 mating and un-mating for the reliable un-mating of the cable connector a special tool is dedicated : un-mating tool 15w004-000 usage remarks: 1. the vertical mating axis of the pcb receptacle and the cable connector has to be aligned during the connecting and a click will confirm that the connec tors are mated correctly. 2. the disconnection of the 2 connectors is carried ou t vertically with the tool 15w004-000 in the mating axis of the 2 connectors. 3. the connectors should not be mated under an extreme angle. 4. avoid the forcefull twisting or deforming of the ca ble. m i s a l i g n m e n t m a x . 5 packing standard 25 pcs in plastic bag draft date approved date rev. engineering change n umber name date c. kainzmaier 05.08.15 c. kainzmaier 13.05.16 b00 16-0003 a. streibl 13.05.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended a s representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
